ATS Successfully Demonstrates Air Cooling System, Therm-Jett, for Blade Servers in Cloud Computing

ATS successfully demonstrated an air cooling system for blade servers which are often used to power cloud computing datacenters. The patent pending system, using only standard chassis air flow, cooled a 1 KW heat load in a 1U chassis.

Advanced Thermal Solutions, Inc, ATS, recently demonstrated in their thermal lab a newly developed, patent pending, air jet impingement technology designed specifically for 1U compute blades. Named Therm-Jett ™ the technology has been demonstrated by ATS to utilize air to cool upwards of 2 KW in a 1U blade chassis.

The innovative Therm-Jet™ cooling system is capable of dissipating 1 KW to 2 KW of heat in a 1-U form factor. Lab tests have demonstrated that four heat sinks on four simulated chips located on a PCB have achieved 0.16 to 0.18 C/W thermal resistances. The power dissipation of each simulated component was tested at 200 W. This compares very favorably versus the thermal resistances of the same heat sinks with parallel flow using the same fans. Results of side by side testing in ATS's lab showed that Therm-Jett enabled systems to be almost 20 to 40% better than a 1U blade without Therm-Jet.

The ATS technology uses a specially made duct with an impingement plate under it to create jet impingement on top of the components and heat sinks. The tremendous increase in heat transfer coefficient causes the new system to significantly increase the power dissipation of the 1U compared to other conventionally cooled 1U chassis.

Therm-Jett can be custom configured for a variety of blade types and topologies. The impingement duct is less than 5 mm thick and is located in a chassis on top of the motherboard. A key advantage of Therm-Jet is there won't be a need to make a special duct for each heat sink freeing the other board for other components.

ATS has a white paper available on their Therm-Jett technology. To get a free copy from them, email [email protected] requesting their Therm-Jett white paper.
ATS is a leading engineering/manufacturing company focused on innovations in the thermal management of electronics. Founded in 1989 as a consulting company, ATS has evolved to a complete thermal solutions provider and is world renowned for its product and service portfolio, including more than 450 high- and ultra-performance heat sinks, research-quality test equipment, leading-edge R&D, thermal engineering consulting and thermal management education.

Share:


Tags: air cooling, air cooling systems, ATS, blade computing, Cloud Computing, Datacenter, jet impingement, thermal engineering, thermal management


About Advanced Thermal Solutions, Inc.

View Website

Andrea Koss
Press Contact, Advanced Thermal Solutions, Inc.
Advanced Thermal Solutions, Inc.
89-27 Access Road
Norwood, MA 02062
United States