Durable High Temperature Epoxy Resists Chemicals
High temperature resistant epoxy EP125, for casting, laminating, bonding and sealing applications is designed to withstand prolonged exposure to chemicals and temperature extremes.
Online, December 8, 2009 (Newswire.com)
-
Hackensack, NJ. November 29, 2009 - Master Bond has released a high temperature epoxy for service above 500°F. EP125 is a toughened, two part epoxy designed to withstand exposure to boiling acids, alkalis, salts, fuels and most organic solvents. It develops durable bonds between metallic and nonmetallic surfaces. The heat resistant adhesive features excellent dimensional stability in addition to superior electrical insulating properties. Thermally stable bonds retain their pertinent physical profile and chemical resistance even after prolonged exposure to extreme temperatures.
EP125- heat resistant epoxy achieves a lap shear strength on the order of 2,500 psi at ambient temperatures. After heat aging for 1,000 hours at 500°F, an excellent, near 50% of the original bond strength, is retained. Castings exhibit flexural strength as high as 15,000 psi and a flexural modulus of more than 500,000 psi. 100% reactive, solvent and volatile free, the high temperature sealant / coating cures at elevated temperatures. Cure cycles can be widely adjusted so as to best meet specific processing needs. Master Bond's improved high temperature epoxy is recommended for bonding, casting, laminating and sealing applications where exceptional long term resistance to heat and aggression is imperative.
About Master Bond's High Temperature Epoxy Systems:
Master Bond manufactures high temperature epoxy systems for serviceability at extremely high temperatures. They retain good physical strength properties even after prolonged exposure to unfavourable environmental conditions in the 400-600°F temperature range. Both one and two part epoxies and silicone compositions are available with a wide range of curing conditions so as to best meet specific service requirements.
Read more about Master Bond's high temperature epoxy systems: http://www.masterbond.com/produse/produse_ht.html or contact: Technical Support. Phone: 201-343-8983 Fax: 201-343-2132 E-mail: [email protected]
Share:
Tags: adhesive manufacturer, temperature adhesive, temperature epoxy