VoluMill for Siemens NX CAM and CAM Express

Online, March 22, 2011 (Newswire.com) - VoluMill is now fully integrated with Siemens NX CAM and CAM Express. VoluMill replaces your traditional roughing tool path with a volumetric removal method. Siemens PLM realized VoluMill was a "game changer for milling" and fully supported the efforts to integrate the volumetric engine or VoluMill inside NX CAM and CAM Express.

VoluMill will improve machining times and decrease tool wear in your most difficult to cut materials such as 6Al4V Titanium and 17-4 ph stainless steel. Softer materials such as 606-T6 and 1018 steel also benefit from volumetric material removal.
The results are stunning!

• 40% to 60% reduction in roughing times
• 2 to 3 times improvement in tool life
• Decrease machine tool wear

"It's not uncommon to reduce your cycle times up to 80% by using the tools paths from VoluMill" [Mike Fischer, Application Engineer]. "The decision to purchase and use VoluMill is one of the easiest decisions for our customers to make when they see how VoluMill immediately impacts their machining" [Swoosh Technologies-Midwest distributor of VoluMill].

This winning combination of VoluMill with NX CAM and NX CAM Express will significantly reduce machining time, tooling cost, and increase the performance of your machine tool.

Join us April 14th webinar on VoluMill with NX CAM & CAM Express.
Commit 40 minutes with us, and we'll show you immediate cost savings that will enable you to leave your competition in the dust!Register for this online event by calling us at (888) 318-5104, option 4, or on the web at swooshtech.com under the "webinars" tab.

Swoosh Technologies & Solutions, LLC, a leading integrator of automated design & manufacturing software, is the Midwest distributor of VoluMill, a product of Celeritive Technologies.